Racking Inspection and Audit Services

Keep your racking safe & up-to-date

Gerry Brown’s Shelving provide an onsite comprehensive racking inspection service to ensure the safety of your team and structural integrity of your racking.

Our inspections are conducted onsite and in accordance with the Australian Standards Design 4084.1:2023 and Operations 4084.2:2023. Inspections consist of a site visit by an experienced racking inspector who will visually inspect racking and provide qualified onsite feedback.

Gerry Brown's Racking Inspection Illustration

After the inspection you will be provided with a detailed report and plan of action if needed. Once the inspected site meets the Australian Standard, Gerry Brown’s Audit Services can provide you with a racking inspection safety certificate. 

INSPECTIONS CAN:
– Prevent damage to people or goods
– Extend the life span of your warehouse storage
– Lower the cost of future repairs by finding risks early

Does your Pallet Racking meet the current AS4084-2023 standards?

We can help…

Racking Inspections and Audits ensure the correct application and use of equipment in your warehouse/workshop.

Your Inspection Report will highlight damage, potential risks and hazards. These are compiled into a detailed report and action plan to bring your site up to the Australian Standard. Remember to make sure your racking is being installed by a licensed installer.

Do you require an inspection?

According to the Australian Standard of the Operation and Maintenance of Adjustable Pallet Racking Section 8.2; Inspections shall be carried out on a regular basis and at least once every twelve months. The purpose for the inspection is to evaluate the condition of your racking integrity and identify any damaged components that need replacing.

WHAT OUR INSPECTORS ARE LOOKING FOR

    • ensure the correct application and use of equipment;
    • ensure that the working load limits are adhered to;
    • ensure that the racking installation has not been altered. A copy of the load application and configuration drawings shall be retained for this purpose;
    • examine the extent of damage due to impact in the racking installation;
    • examine the out-of-plumb of the racking;
    • examine for any dislocation and deformation of sections and connections for uprights and beams;
    • examine connectors for deformation or signs of cracking of the welds; and
    • examine base plates and floor anchors.

Pallet Racking usually sits in a busy and potentially dangerous environment where accidents can happen. When a component of your racking is damaged it will weaken the structure and that may compromise the integrity of the racking, placing people and goods at risk.

 

KEEP A RECORD OF THE RACKING DESIGN

In accordance with the Australian Standard for Steel Storage Racking, detailed drawings showing the layout of the run, capacity per pallet space & overall bay load must be provided with all new installations.

The racking supplier must be notified if any changes are made and drawings therefore need to be reproduced.

RackingDesignTempImage

BOOK YOUR RACKING INSPECTION WITH A QUALIFIED INSPECTOR

$1,094.95

Office Furniture

Flow Reception Counter

$1,245.90

Plastic Storage

Stor-Pak 10

$4.60$27.60

Flatpack Shelving

Industrial Shelving Kit 4T

$675.00

Tie Downs & Straps

Utility Strap 20kg (2 Pack)

$12.95

Follow us on instagram

Error validating access token: The session has been invalidated because the user changed their password or Facebook has changed the session for security reasons.